
aFrame Support
- The aFrame supports SD/SDHC card from 2GB to 32GB in capacity.Do not use SDXC cards, they are not supported.
- Please use an SD card fomatted with a PC or the aFrame.
- When an SD card is formatted, all data on the SD card will be deleted.If there is necessary data on the SD card, please back the data up before formatting.
- In order to read an aFrame project/tone data file, it is required aFrame's firmware version be the same or newer than the one with which the project/tone data file was created.If the aFrame firmware is an older version, proper loading and operation of the data is not guranteed.Please update firmware to the latest version for safe use.
[Disclaimer]
Version 1.90 BETA firmware has been prepared and released for demonstration at NAMM 2019. The official firmware version (2.0) will be released at a later date.
For further details, please refer to the reference manual that will be released along with the official version of the firmware.
If you choose to install and use this beta version then please note that quality assurance verification of all functions is not complete. The user therefore accepts all risks associated with installing firmware version 1.90.
Version 1.90 is made available for your convenience so you can try out the exiting new features that will be included in our forthcoming official firmware release (Version 2.0)
[Note] Please backup all active projects held in internal memory to your SD card.
[Step]
1. Update aFrame firmware to ver.1.90.
2. Turn off the aFrame power.
3. Pressing encoder wheel and power switch for a while until the display reads 'INIT SYS/Project'.
4. Select the option 'yes'. This will initialize the system settings and write factory presets to the aFrame’s internal memory locations: INT.Memory1, INT.Memory 2.
- INT.Memory1: Factory preset1(VER.1.20)
- INT.Memory2: Factory Preset2(VER.2.00)
Note that after initialization is complete, the INT.Memory 1 factory presets (Ver. 1.20) are loaded and available for use. To use the version 2.00 presets, press the [1 PITCH] and [4 VOLUME] buttons simultaneously to activate the system menu. Press the [1 PITCH] button once and the display will read ‘SYS:Load Project’. Turn the encoder wheel to select INT.Memory 2, and press the encoder to load.
* This firmware is Beta version for NAMM2019. The official version will be released at a later date.
For details, refer to the reference manual to be released at a later date.
Please use this version at your own risk.
Release Note | New Features in brief
Factory Preset
- 80 exciting new tones intended for release with firmware 2.0 have been created. These tones demonstrate the new system features.
System Menu Fucntions
- Project / Tone management (load instrument or effect to working memory, copy to working memory).
Instrument Edit Functions
- New scale types: 5th, Octave, Chromatic
- Pressure Scale Control:
Pressure note up, Pressure note down, Random note up, Random note down, Random note up & down, Sequential note up, Sequential note down, Sequential note up & down, Sequential note down & up, Skip note up, Skip note down, Skip note up & down, Skip note down & up.
- Instrument management: load factory instrument.
- Pressure Panning control.
- Pressure Volume level control.
- Master send on/off.
Effects
- New effect management functions, loading factory preset effects.
- New effect algorithms – Compressor, Ambience, and two 3D binaural spatialisation effects (Space R, Space Z).
- Master effect matrix options (Master insert, Send/Return).
Randomize Parameters Function
- It is now possible to select and randomize parameters for instrument layers (Main, Sub, Xtra, Dry).
- The level of randomization can be adjusted to create different variations.
License terms
Please be sure and confirm the following matters before you download the software from this site.
The software on this site should be managed by the user (customer) under the following terms and conditions:
Rights | Our licensed users (customers) have a right to use the software but those copyrights and the intellectual property rights remain the property of ATV Corporation. |
---|---|
Transfer | Regardless of whether the software is free or non-free, the downloaded software shall not be transferred to others, that is, a third person or a third party. |
Copy limitation | It is permitted to downloaded and copy the software only for the aim of backup. |
Software Modification and Analysis | Any modification or analysis of the downloaded software is prohibited. ATV Corporation will not guarantee the performance of any modified software and ATV is not responsible for any damage which may occur with using modified software. |
Change of Specifications | ATV Corporation reserves the right to make changes in the specifications of the software on this site at any time without notice. |
Disclaimer | The use of the software on this site, including downloading, is at your own discretion and risk. ATV Corporation is not responsible for any loss or claim of any sort that you may incur from dealing with third person/party derived software therefrom. Please check sentence!! ATV Corporation is not obliged to fix bugs or faults in the software programs. |
Export Restrictions/Legal Compliance | If the user (customer) exports the downloaded software from this site, they shall agree to comply with all export laws, restrictions and regulations of any agency or authority falling under the exported country. |
Execution of SYS: Init Project (System Edit) is necceassry for factory preset update.
When Sys: Init Project is executed, all inst & effect data is initialized.
If you need inst & effect data now, please take a backup to SD card firstly.
2018.04.12 | We have released aFrame reference manual Ver 1.21
Release Notes
- System edit menu changing and additions.- GroupKeyLock function was added.
- Extention of Extra timbre "XtraType".
- Tune parameter changing
- Additon: negative Value Adjustment.
- Algorithm Multi-Tap Delay was added.
- Support BPM display of DLY and Multi-Tap DLY DelayTime.
- Factory preset A' - D' ( 40tones) were updated with new Groups.
Firmware update procedure
aFrame_update_procedure_en.pdf[PDF:3.2MB]
Reference Manual
License terms
Please be sure and confirm the following matters before you download the software from this site.
The software on this site should be managed by the user (customer) under the following terms and conditions:
Rights | Our licensed users (customers) have a right to use the software but those copyrights and the intellectual property rights remain the property of ATV Corporation. |
---|---|
Transfer | Regardless of whether the software is free or non-free, the downloaded software shall not be transferred to others, that is, a third person or a third party. |
Copy limitation | It is permitted to downloaded and copy the software only for the aim of backup. |
Software Modification and Analysis | Any modification or analysis of the downloaded software is prohibited. ATV Corporation will not guarantee the performance of any modified software and ATV is not responsible for any damage which may occur with using modified software. |
Change of Specifications | ATV Corporation reserves the right to make changes in the specifications of the software on this site at any time without notice. |
Disclaimer | The use of the software on this site, including downloading, is at your own discretion and risk. ATV Corporation is not responsible for any loss or claim of any sort that you may incur from dealing with third person/party derived software therefrom. Please check sentence!! ATV Corporation is not obliged to fix bugs or faults in the software programs. |
Export Restrictions/Legal Compliance | If the user (customer) exports the downloaded software from this site, they shall agree to comply with all export laws, restrictions and regulations of any agency or authority falling under the exported country. |
aFrameQuickStart_en_01.pdf[PDF:1.4MB]
Quick Start Guide (German)aFrameQuickStart_de_01.pdf[PDF:1.4MB]
Quick Start Guide (French)aFrameQuickStart_fr_01.pdf[PDF:1.4MB]
Quick Start Guide (Spanish)aFrameQuickStart_es_01.pdf[PDF:1.5MB]
Quick Start Guide (Dutch)Because the following applications are not products; there is no support.
Please read and agree with the license terms before using.
The following applications are examples of ExternalCommunication Interface specification utilization.
It is possible to change/edit tones on a PC or Mac computer, as well as check altered tone parameters during the editing process. You can also easily mute one or more of the four timbres, the four building blocks of tones.This application will be a powerful assistant when creating new tones.
* This application can be used in combination with aFrame firmware Version 1.90
This release was developed for NAMM 2019 and is for Mac OSX only.
Manual
aFrameEditManualVer0210_QucikReference.pdf[PDF:891.6KB]
License terms
Please be sure and confirm the following matters before you download the software from this site.
The software on this site should be managed by the user (customer) under the following terms and conditions:
Rights | Our licensed users (customers) have a right to use the software but those copyrights and the intellectual property rights remain the property of ATV Corporation. |
---|---|
Software Modification and Analysis | ATV Corporation will not support and guarantee the performance of any modified software and ATV is not responsible for any damage which may occur with using modified software. |
Change of Specifications | ATV Corporation reserves the right to make changes in the specifications of the software on this site at any time without notice. |
Disclaimer | The use of the software on this site, including downloading, is at your own discretion and risk. ATV Corporation is not responsible for any loss or claim of any sort that you may incur from dealing with third person/party derived software therefrom. Please check sentence!! ATV Corporation is not obliged to fix bugs or faults in the software programs. |
Export Restrictions/Legal Compliance | If the user (customer) exports the downloaded software from this site, they shall agree to comply with all export laws, restrictions and regulations of any agency or authority falling under the exported country. |
aFrameEditManual_Mac_en.pdf[PDF:2.8MB]
License terms
Please be sure and confirm the following matters before you download the software from this site.
The software on this site should be managed by the user (customer) under the following terms and conditions:
Rights | Our licensed users (customers) have a right to use the software but those copyrights and the intellectual property rights remain the property of ATV Corporation. |
---|---|
Software Modification and Analysis | ATV Corporation will not support and guarantee the performance of any modified software and ATV is not responsible for any damage which may occur with using modified software. |
Change of Specifications | ATV Corporation reserves the right to make changes in the specifications of the software on this site at any time without notice. |
Disclaimer | The use of the software on this site, including downloading, is at your own discretion and risk. ATV Corporation is not responsible for any loss or claim of any sort that you may incur from dealing with third person/party derived software therefrom. Please check sentence!! ATV Corporation is not obliged to fix bugs or faults in the software programs. |
Export Restrictions/Legal Compliance | If the user (customer) exports the downloaded software from this site, they shall agree to comply with all export laws, restrictions and regulations of any agency or authority falling under the exported country. |
Fixed bug that the display partly collapsed.
Manual
aFrameEditManual_Win_en.pdf[PDF:1.1MB]
License terms
Please be sure and confirm the following matters before you download the software from this site.
The software on this site should be managed by the user (customer) under the following terms and conditions:
Rights | Our licensed users (customers) have a right to use the software but those copyrights and the intellectual property rights remain the property of ATV Corporation. |
---|---|
Software Modification and Analysis | ATV Corporation will not support and guarantee the performance of any modified software and ATV is not responsible for any damage which may occur with using modified software. |
Change of Specifications | ATV Corporation reserves the right to make changes in the specifications of the software on this site at any time without notice. |
Disclaimer | The use of the software on this site, including downloading, is at your own discretion and risk. ATV Corporation is not responsible for any loss or claim of any sort that you may incur from dealing with third person/party derived software therefrom. Please check sentence!! ATV Corporation is not obliged to fix bugs or faults in the software programs. |
Export Restrictions/Legal Compliance | If the user (customer) exports the downloaded software from this site, they shall agree to comply with all export laws, restrictions and regulations of any agency or authority falling under the exported country. |
For details, please see the technical information page.
[Note] This application is compatible with Ver 1.10.
License terms
Please be sure and confirm the following matters before you download the software from this site.
The software on this site should be managed by the user (customer) under the following terms and conditions:
Rights | Our licensed users (customers) have a right to use the software but those copyrights and the intellectual property rights remain the property of ATV Corporation. |
---|---|
Software Modification and Analysis | ATV Corporation will not support and guarantee the performance of any modified software and ATV is not responsible for any damage which may occur with using modified software. |
Change of Specifications | ATV Corporation reserves the right to make changes in the specifications of the software on this site at any time without notice. |
Disclaimer | The use of the software on this site, including downloading, is at your own discretion and risk. ATV Corporation is not responsible for any loss or claim of any sort that you may incur from dealing with third person/party derived software therefrom. Please check sentence!! ATV Corporation is not obliged to fix bugs or faults in the software programs. |
Export Restrictions/Legal Compliance | If the user (customer) exports the downloaded software from this site, they shall agree to comply with all export laws, restrictions and regulations of any agency or authority falling under the exported country. |
FlaConApp_Manual_Mac_en.pdf[PDF:1.1MB]
License terms
Please be sure and confirm the following matters before you download the software from this site.
The software on this site should be managed by the user (customer) under the following terms and conditions:
Rights | Our licensed users (customers) have a right to use the software but those copyrights and the intellectual property rights remain the property of ATV Corporation. |
---|---|
Software Modification and Analysis | ATV Corporation will not support and guarantee the performance of any modified software and ATV is not responsible for any damage which may occur with using modified software. |
Change of Specifications | ATV Corporation reserves the right to make changes in the specifications of the software on this site at any time without notice. |
Disclaimer | The use of the software on this site, including downloading, is at your own discretion and risk. ATV Corporation is not responsible for any loss or claim of any sort that you may incur from dealing with third person/party derived software therefrom. Please check sentence!! ATV Corporation is not obliged to fix bugs or faults in the software programs. |
Export Restrictions/Legal Compliance | If the user (customer) exports the downloaded software from this site, they shall agree to comply with all export laws, restrictions and regulations of any agency or authority falling under the exported country. |
FlaConApp_Manual_Win_en.pdf[PDF:733.8KB]
License terms
Please be sure and confirm the following matters before you download the software from this site.
The software on this site should be managed by the user (customer) under the following terms and conditions:
Rights | Our licensed users (customers) have a right to use the software but those copyrights and the intellectual property rights remain the property of ATV Corporation. |
---|---|
Software Modification and Analysis | ATV Corporation will not support and guarantee the performance of any modified software and ATV is not responsible for any damage which may occur with using modified software. |
Change of Specifications | ATV Corporation reserves the right to make changes in the specifications of the software on this site at any time without notice. |
Disclaimer | The use of the software on this site, including downloading, is at your own discretion and risk. ATV Corporation is not responsible for any loss or claim of any sort that you may incur from dealing with third person/party derived software therefrom. Please check sentence!! ATV Corporation is not obliged to fix bugs or faults in the software programs. |
Export Restrictions/Legal Compliance | If the user (customer) exports the downloaded software from this site, they shall agree to comply with all export laws, restrictions and regulations of any agency or authority falling under the exported country. |
Offical SNS
Share
Tweet